Redondo Beach, CA, November 10, 2026 — Aerofex Corporation today released video of two thrust vectoring propulsors (TVPs) mounted coaxially on a Group 2 VTOL UAV. The rotational speed and thrust vector of each propeller are controlled independently.
Each propulsor can point its thrust vector up to ±12 degrees off-axis in either direction, moving between the extremes in 0.15 seconds, independent of propeller speed. The motors and airframe remain fixed.
The 31-inch propellers use off-the-shelf UAV blades, with pitch tailored between the upper and lower sets. Demonstrated rotational speeds are up to 4,600 rpm. With both thrust vectors at full deflection, the reduction in coaxial thrust is less than 2%. Multicopters, by comparison, maneuver by varying rotor speed, requiring 35%-50% of their thrust reserved for control, which reduces the thrust available for lift.
Central to the methodology, Aerofex has developed small constant-velocity (CV) joints that allow pointing the spinning propellers about any axis. There are no gears. The type of CV joint employed was originally developed in 1960’s. It is a proven and robust design widely used in automotive drivetrains with transfer efficiency above 98% at travel up to ±25 degrees. The joints developed by Aerofex weigh under 30 grams and are at Technology Readiness Level 7 (TRL 7).
About Aerofex
Aerofex is an aerospace technology company based in Redondo Beach, California, developing thrust vectoring technology and flight control systems for propeller-driven aircraft, crewed and uncrewed. Its team has flight-tested multiple heavy-lift VTOL aircraft. Aerofex technology is protected by multiple granted and pending U.S. and international patents, including U.S. Patent No. 12,371,154. Learn more at aerofex.com.
Media contact: aerofex.com/contact


